Well pump repair cost: $150–$300 for a pressure switch
Few well pump repair prices are published. The ones we could verify: a new pressure switch costs $150–$300 installed at a Texas driller, and a plumber's trip charge runs $75–$200 per a national supplier. If the pump itself has failed, repair turns into replacement at $1,000–$4,000 installed on our national band.
1,Key figures
Get quotes from local drillers
What we could verify
Most repair price lists sit on cost aggregator sites that we could not load, so we do not repeat their numbers. These are the published prices we could check.
| Job | Price | Published by |
|---|---|---|
| Pressure switch, installed | $150–$300 | Water Well Drilling Weatherford (TX), 2026 |
| Service or trip charge | $75–$200 | Mid Atlantic Water, 2026 |
| Pressure tank, plumber-installed | $800–$1,800 | Mid Atlantic Water, 2026 |
| Pump replacement, central Georgia | $1,200–$2,500 | Well Watchers, 2026 |
| Submersible pump job | $1,000–$2,500 | Mid Atlantic Water, 2026 |
What we could not price
We found no verifiable published price for a control box or capacitor, a check valve, a wire splice, hourly pump labor, or pulling a pump to inspect it. We will add them when a driller or agency publishes one. Until then, ask any installer to itemize parts, labor and the pull.
Repair or replace
Start with the cheap parts above ground. A switch with burned contacts or a waterlogged tank can make a sound pump short-cycle. If the pump has to come out of the well, most of the cost is the pull, so on an older pump replacement often makes more sense. R.C. Worst puts a residential submersible's life at 8 to 15 years depending on the motor.
Sources4
Common questions
Why is my well pump running but not building pressure?
It can be the pump, a leak in the drop pipe, or a well that has dropped below the pump. Each needs a different fix, so get it diagnosed before buying parts.
Can I replace a pressure switch myself?
Many owners do, with the power off at the breaker. If you hire it out, Weatherford's price of $150–$300 includes the part and labor.
For the cost of a finished well in your state, see well drilling costs.
Sources
- Well Pressure Tank Replacement Cost , Water Well Drilling Weatherford (Weatherford, TX). Accessed November 8, 2026. Published 2026-09-29, updated 2026-11-05. Pressure tank replacement $800-$1,800 installed in 2026; pressure switch $150-$300; difficult installs to about $3,500.
- How Much Does a Well Pressure Tank Cost? , Mid Atlantic Water LLC (water-system supplier, nationwide). Accessed November 8, 2026. Updated 2026-10-14; prices live as of 2026-09. Tank replaced by plumber $800-$1,800 all-in (20-44 gal); labor $200-$500; submersible pump job $1,000-$2,500; tank plus pump $2,500-$5,000+. Supplier, not an installer.
- Well Services FAQs , Well Watchers / Expert Well Drilling & Well Pump Services (Milner, GA). Accessed November 8, 2026. 2026 footer. Central Georgia drilling $25-$35/ft; pump system $1,500-$3,000; pump replacement $1,200-$2,500; permits and testing $300-$600; total $5,000-$12,000.
- How Long Should My Submersible Well Pump Last? , R.C. Worst & Company Inc. (pump supplier). Accessed November 9, 2026. 2018-11-02. Residential 3-wire 10-15 years; 2-wire 8-13 years; 50+ cycles a day under 10 years; extreme sediment under 2 years, no sediment 15+ years.
How these figures are built: methodology. Updated November 2026.