Cost to drill a well in Wyoming: $6,800–$52,600 by county
Key figures for Wyoming
Estimate a well in Wyoming
Typical total: $6,800–$52,600, midpoint $25,000.1,
Depths from 4,591 domestic well reports in Wyoming, 2016–2025: 101 ft (25th percentile), 240 ft (median), 420 ft (75th percentile).
| Line item | Low | Mid | High |
|---|---|---|---|
| Drilling (per foot of depth) (240 ft × $50/ft) | $2,500 | $12,000 | $31,5003 |
| Casing, installed (156 ft × $28/ft) | $1,000 | $4,300 | $7,0004 |
| Rig mobilization and setup ($550–$2,500) | $600 | $1,500 | $2,5005 |
| Well permit ($50–$500) | $100 | $300 | $5006 |
| Pump, wire, and drop pipe, installed ($1,000–$4,000) | $1,000 | $2,500 | $4,0007 |
| Pressure tank and switch, installed ($500–$1,800) | $500 | $1,200 | $1,8007 |
| Trench, water line, and electrical to the house ($1,000–$5,000) | $1,000 | $3,000 | $5,0008 |
| Water quality test ($50–$250) | $100 | $200 | $3009 |
| Total | $6,800 | $25,000 | $52,600 |
Casing depth of 156 ft is a model assumption; the records for this area do not report casing.2
No state rate survey yet, so national driller rates are used.
Get quotes from licensed drillers in Wyoming
Tell us your ZIP code and what you need. We pass it to drillers who work in your part of Wyoming.
Well depth by county in Wyoming
| County | Reports | Median depth (ft) | Middle half (ft) | Range chart0 to 590 ft |
|---|---|---|---|---|
| Laramie | 990 | 440 | 380–500 | |
| Fremont | 438 | 120 | 60–450 | |
| Lincoln | 350 | 160 | 110–260 | |
| Albany | 304 | 160 | 120–260 | |
| Park | 293 | 80 | 40–120 | |
| Sheridan | 219 | 200 | 110–400 | |
| Johnson | 214 | 260 | 160–380 | |
| Sublette | 207 | 180 | 120–260 | |
| Natrona | 202 | 160 | 60–380 | |
| Teton | 181 | 100 | 80–240 | |
| Crook | 176 | 370 | 250–500 | |
| Platte | 143 | 240 | 160–340 | |
| Campbell | 142 | 480 | 340–590 | |
| Goshen | 133 | 200 | 120–300 | |
| Carbon | 128 | 110 | 70–190 | |
| Converse | 128 | 190 | 100–340 | |
| Uinta | 99 | 110 | 80–170 | |
| Big Horn | 56 | 40 | 30–100 | |
| Weston | 49 | 400 | 200–560 | |
| Sweetwater | 46 | 140 | 80–240 | |
| Washakie | 43 | 160 | 40–380 | |
| Niobrara* | 26 | 220 | 130–280 | |
| Hot Springs* | 24 | 50 | 30–160 |
* 2 counties have fewer than 30 reports. Estimates there use the statewide figures.
Median depth runs from 40 ft in Big Horn County to 480 ft in Campbell County. At national rates that difference is worth about $30,200 at the midpoint estimate. 2 of 23 counties have fewer than 30 reports; the calculator uses the statewide figure for those.
Where the money goes on a Wyoming well
Drilling is billed by the foot at $25–$75/ft, so the hole alone runs $2,500–$31,500 at the depths above. Casing, the steel or PVC pipe that lines the upper borehole, adds $1,000–$7,000 at $10–$45/ft. Rig setup is a flat $600–$2,500.
The pump, pressure tank, and trench to the house add $2,500–$10,800 on top of the hole. A quote that looks low next to the range above often leaves those three out, so ask for it itemized.
Permits and driller licensing in Wyoming
Water wells in Wyoming fall under Wyoming State Engineer's Office, Ground Water Division. Domestic and stock wells need a State Engineer permit before drilling, and the driller must have the approved permit on hand during construction. The well must be drilled by a licensed contractor, and pumps must be installed by a Wyoming licensed pump installation contractor. A Statement of Completion (Form U.W. 6) is required by law within 30 days of the date the well is completed, including pump installation, and ready for use.
Sources10
Groundwater and well construction in Wyoming
A well at the Wyoming median reaches 240 ft with casing to about 160 ft, a model assumption because the records here do not report casing. The State Engineer's well construction standards put a well 50 feet from a septic tank and 100 feet from a disposal field.
Wyoming compared with neighboring states
Common questions
How deep is a typical well in Wyoming?
Half of the 4,591 domestic wells reported in Wyoming from 2016–2025 are between 100 ft and 420 ft deep, and the median is 240 ft. Your county can sit well above or below that, so check the county table on this page before you compare quotes.
How much does it cost per foot to drill a well in Wyoming?
Drilling alone runs $25–$75/ft on the rates we compiled. Spread across a whole finished well, including casing, pump, tank, and hookup, the midpoint estimate works out to about $104/ft at a depth of 240 ft. Per-foot quotes rarely include the pump.
Do you need a permit to drill a well in Wyoming?
Domestic and stock wells need a State Engineer permit before drilling, and the driller must have the approved permit on hand during construction. The driller usually files the paperwork, but the permit is tied to your property, so ask for a copy.
How much do a well pump and pressure tank add in Wyoming?
An installed submersible pump with wire and drop pipe runs $1,000–$4,000, and a pressure tank with its switch runs $500–$1,800. Together they are often the line items missing from a drilling quote, so a quote for the hole alone will look $3,700 cheaper than a finished well.
For every state side by side and the national range, see our national cost table.
Sources
- Well and spring permits , Wyoming State Geological Survey (from Wyoming State Engineer's Office permits). Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
- Default casing share of well depth , Cost to Drill a Well. Accessed November 9, 2026. Median of state casing_p50 / depth_p50 across states that report casing. Used only where no local casing median exists.
- Water Well Installation: Complete Guide, Cost and Tips for Success , Stevens Drilling (La Vernia, TX). Accessed November 8, 2026. Published 2025-10-27. Drilling $25-$65/ft; pumps $500-$2,000; pressure tank $300-$1,500; permit/licensing $100-$750; total $7,500-$17,000+.
- Cost to Drill a Water Well in Northern California , Weeks Drilling & Pump Co. (Sebastopol, CA). Accessed November 8, 2026. Published 2026-04-30. Drilling $35-$130/ft; steel casing $20-$45/ft; pump and pressure tank $3,500-$9,000; permitting $500-$2,500.
- D-203(5) Statewide Drilling Services, Exhibit D Price Schedule (Thein Well Co., contract 226711) , Minnesota Office of State Procurement. Accessed November 8, 2026. 2023 state-contract unit rates from a licensed MN driller: 6-in borehole $30-$31/ft (mud rotary/auger), $75/ft air rotary in rock; 6-in casing $28/ft (code) to $48/ft (black steel); mobilization $1,000/project; 34-gal pressure tank installed $1,000, 62-gal $1,450; submersible pump 3/4-1 hp $1,250-$1,350 each; drop pipe $7/ft; pitless and lateral $2,000; trench $20/LF. Agency-buyer rates, not retail quotes.
- Compilation of fetched state and county well permit fees (research/rates/NOTES.md, section permit) , costtodrillawell.com research. Accessed November 8, 2026. Internal compilation used only for the national permit fallback. Component sources: ok-owrb-well-driller-fact-sheet ($0), fl-nwfwmd-well-fees through fl-manatee-water-wells-2026 ($35-$265), ny-dutchess-dbch-fees ($45), wi-dnr-well-notification ($50.50), ga-pierce-well-permit-2024 ($70), idaho-code-42-235 ($75), crs-37-92-602 ($100), az-ars-45-596 ($100-$150), nmac-19-27-5 ($125), wa-rcw-18-104-055 ($200), nc-wayne-private-wells through nc-gaston-eh-fees ($225-$450), mi-grand-traverse-fees-2026 and mi-delta-menominee-fees-2025 ($240-$334), mt-dnrc-form-613-2025 ($250-$400), pa-chester-county-health-fees ($300), mn-stat-103i-208 ($325), oh-logan-fees-2024 through oh-summit-fees-2025 ($350-$594), or-hb2808-2025 ($490), blanco-pedernales-gcd-fees-2025 ($500), ca-calaveras-fees-2026 ($693), ny-nyc-well-water-permit ($1,090 outlier).
- How Much Does a Well Pressure Tank Cost? , Mid Atlantic Water LLC (water-system supplier, nationwide). Accessed November 8, 2026. Updated 2026-10-14; prices live as of 2026-09. Tank replaced by plumber $800-$1,800 all-in (20-44 gal); labor $200-$500; submersible pump job $1,000-$2,500; tank plus pump $2,500-$5,000+. Supplier, not an installer.
- What Are the Cost Factors of Drilling a Santa Fe Water Well? , Boylan Water Well Service (Santa Fe, NM). Accessed November 8, 2026. Published 2026-06-25. Drilling incl. PVC casing $28-$65/ft; submersible pump $850-$2,500; casing and grouting $1,500-$4,000; pressure tank and controls $500-$1,800; electrical hookup and trenching $1,000-$3,500; permits and lab testing $300-$1,000; turn-key $12,000-$30,000+.
- DSHS Austin Laboratory Fee Schedule, effective 2026-09-01 , Texas Department of State Health Services. Accessed November 8, 2026. Potable Water (coliform) MZZ0441A $18.39; Nitrate-N EZZ0048A $30.00; Routine Water Mineral Group $155; All Metals $165; VOCs $150.
- General Processes, Ground Water , Wyoming State Engineer's Office. Accessed November 9, 2026. Fetched: permit before drilling, licensed drilling and pump contractors, U.W. 6 due within 30 days of completion.
- Part III, Water Well Minimum Construction Standards , Wyoming State Engineer's Office. Accessed November 9, 2026. Fetched: Ch. III setback table (septic tank 50 ft, disposal field 100 ft). Rules filed 2010, corrected 2011.
- DWR Well Application Permit , Colorado Division of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
- C.R.S. 37-92-602 Exemptions; presumptions; legislative declaration (current through Fall 2025) , Colorado Revised Statutes via colorado.public.law. Accessed November 8, 2026. Fee of $100 for a new exempt household well permit application; $60 for a replacement/paragraph (c) application.
- Water Testing , El Paso County Public Health Laboratory (CO). Accessed November 8, 2026. 2026. Total coliform/E. coli P/A $23.00; nitrate-N $30.00; real estate package $80.00.
- Wells , Idaho Department of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
- Idaho Code 42-235 Drilling Permits , Idaho Legislature. Accessed November 8, 2026. $75.00 permit charge for a domestic or monitoring well; $200 otherwise. Confirmed by IDWR Form 235-1 (https://idwr.idaho.gov/wp-content/uploads/sites/2/forms/235-1-application-for-drilling-permit.pdf).
- Drinking Water Quality Fees (July 2026) , Central District Health (Boise, ID). Accessed November 8, 2026. Coliform test $20; nitrate test $21; sample collection by CDH $145.
- Ground Water Information Center (GWIC) , Montana Bureau of Mines and Geology. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
- Form 613 Water Right Fee Schedule, effective 2025-10-01 , Montana DNRC Water Resources Division. Accessed November 8, 2026. Form 602 Notice of Completion of Groundwater Development (35 gpm / 10 ac-ft exempt well) $250.00; $400.00 in a Controlled Groundwater Area; Form 602I Notice of Intent (effective 01/2026) $400.00 (https://dnrc.mt.gov/_docs/water/Water-Rights-Forms/602I.pdf).
- Environmental Laboratory Testing Fee Schedule, effective 2024-01-01 , Montana DPHHS Laboratory Services Bureau. Accessed November 8, 2026. Total coliform P/A $25.00; nitrate+nitrite as N $28.00; Basic Screen package $55.00; Full Well Screen $340.00.
- Registered groundwater wells , Nebraska Department of Water, Energy, and Environment. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
- Water well completion reports , South Dakota Department of Agriculture and Natural Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
- National depth distribution, median of state percentiles , Cost to Drill a Well. Accessed November 9, 2026. Median across states with records of each state's 25th, 50th, and 75th percentile depth.
How these figures are built: methodology. Updated November 2026.