costtodrillawell.com

Cost to drill a well in Utah: $6,800–$42,500

A drilled, finished water well in Utah typically costs $6,800–$42,500, with a midpoint of $22,300. Depth sets most of that price. Utah does not publish its well completion reports as a bulk download, so this estimate uses the national depth model of 100 ft to 300 ft, priced at national driller rates.1,2,3,4,5,6,7,8,9

Utah has no bulk well-record download we could use, so this page shows statewide estimates from the national depth model and no county figures.

Key figures for Utah

ItemFigure
Finished well, typical range (midpoint $22,300) $6,800–$42,5001,2,3,4,5,6,7,8,9
Drilling and casing only (no pump, tank, or hookup) $4,200–$31,4001,2,3,4,5,6
Drilling rate (national rates) $25–$75/ft3

Estimate a well in Utah

Typical total: $6,800–$42,500, midpoint $22,300.1,2,3,4,5,6,7,8,9

No usable well records for this area, so depths use the national model (100 ft to 300 ft).

Low uses the 25th percentile depth at low rates; high uses the 75th percentile at high rates.
Line itemLowMidHigh
Drilling (per foot of depth) (200 ft × $50/ft)$2,500$10,000$22,5003
Casing, installed (130 ft × $28/ft)$1,000$3,600$5,9004
Rig mobilization and setup ($550–$2,500)$600$1,500$2,5005
Well permit ($50–$500)$100$300$5006
Pump, wire, and drop pipe, installed ($1,000–$4,000)$1,000$2,500$4,0007
Pressure tank and switch, installed ($500–$1,800)$500$1,200$1,8007
Trench, water line, and electrical to the house ($1,000–$5,000)$1,000$3,000$5,0008
Water quality test ($50–$250)$100$200$3009
Total$6,800$22,300$42,500

Casing depth of 130 ft is a model assumption; the records for this area do not report casing.2

No state rate survey yet, so national driller rates are used.

Get quotes from licensed drillers in Utah

Tell us your ZIP code and what you need. We pass it to drillers who work in your part of Utah.

Submitting sends your request to Cost to Drill a Well. We reply by email and may pass it to well contractors who serve your ZIP code. See the privacy policy.

Where the money goes on a Utah well

Drilling is billed by the foot at $25–$75/ft, so the hole alone runs $2,500–$22,500 at the depths above. Casing, the steel or PVC pipe that lines the upper borehole, adds $1,000–$5,900 at $10–$45/ft. Rig setup is a flat $600–$2,500.

The pump, pressure tank, and trench to the house add $2,500–$10,800 on top of the hole. A quote that looks low next to the range above often leaves those three out, so ask for it itemized.

Sources3,4,5,6,7,8,9

Permits and driller licensing in Utah

Water wells in Utah fall under Utah Division of Water Rights. You need a water right, and the driller needs authorization from the State Engineer, shown by a valid start card, before drilling a regulated well. Utah Code 73-3-25 requires a licensed well driller for regulated well drilling. The licensee must file an official well log with the State Engineer within 30 days of completing regulated work on a well.

Sources10,11

Groundwater and well construction in Utah

Well cap Submersible pump Casing to about 130 ft Total depth about 200 ft Soil and loose rock Open hole in rock
Cross-section of a 200 ft well with casing to 130 ft, the Utah median

A well at the Utah median reaches 200 ft with casing to about 130 ft, a model assumption because the records here do not report casing.

Utah has no statewide requirement for testing private well water, and requirements vary by local health department.

Sources2,12

Utah compared with neighboring states

StateMedian depthTypical finished well
Utahno records$6,800–$42,500
Arizona410 ft$15,500–$71,200
Colorado340 ft$10,300–$60,000
Idaho200 ft$7,500–$43,800
Nevada230 ft$9,800–$46,500
New Mexico240 ft$10,400–$42,700
Wyoming240 ft$6,800–$52,600

Sources13,14,4,5,15,9,16,3,17,7,8,18,19,20,21,22,6,23,24,25,2

Common questions

How much does it cost per foot to drill a well in Utah?

Drilling alone runs $25–$75/ft on the rates we compiled. Spread across a whole finished well, including casing, pump, tank, and hookup, the midpoint estimate works out to about $112/ft at a depth of 200 ft. Per-foot quotes rarely include the pump.

Do you need a permit to drill a well in Utah?

You need a water right, and the driller needs authorization from the State Engineer, shown by a valid start card, before drilling a regulated well. The driller usually files the paperwork, but the permit is tied to your property, so ask for a copy.

How much do a well pump and pressure tank add in Utah?

An installed submersible pump with wire and drop pipe runs $1,000–$4,000, and a pressure tank with its switch runs $500–$1,800. Together they are often the line items missing from a drilling quote, so a quote for the hole alone will look $3,700 cheaper than a finished well.

Related pages

For every state side by side and the national range, see cost to drill a well.

Sources

  1. National depth distribution, median of state percentiles , Cost to Drill a Well. Accessed November 9, 2026. Median across states with records of each state's 25th, 50th, and 75th percentile depth.
  2. Default casing share of well depth , Cost to Drill a Well. Accessed November 9, 2026. Median of state casing_p50 / depth_p50 across states that report casing. Used only where no local casing median exists.
  3. Water Well Installation: Complete Guide, Cost and Tips for Success , Stevens Drilling (La Vernia, TX). Accessed November 8, 2026. Published 2025-10-27. Drilling $25-$65/ft; pumps $500-$2,000; pressure tank $300-$1,500; permit/licensing $100-$750; total $7,500-$17,000+.
  4. Cost to Drill a Water Well in Northern California , Weeks Drilling & Pump Co. (Sebastopol, CA). Accessed November 8, 2026. Published 2026-04-30. Drilling $35-$130/ft; steel casing $20-$45/ft; pump and pressure tank $3,500-$9,000; permitting $500-$2,500.
  5. D-203(5) Statewide Drilling Services, Exhibit D Price Schedule (Thein Well Co., contract 226711) , Minnesota Office of State Procurement. Accessed November 8, 2026. 2023 state-contract unit rates from a licensed MN driller: 6-in borehole $30-$31/ft (mud rotary/auger), $75/ft air rotary in rock; 6-in casing $28/ft (code) to $48/ft (black steel); mobilization $1,000/project; 34-gal pressure tank installed $1,000, 62-gal $1,450; submersible pump 3/4-1 hp $1,250-$1,350 each; drop pipe $7/ft; pitless and lateral $2,000; trench $20/LF. Agency-buyer rates, not retail quotes.
  6. Compilation of fetched state and county well permit fees (research/rates/NOTES.md, section permit) , costtodrillawell.com research. Accessed November 8, 2026. Internal compilation used only for the national permit fallback. Component sources: ok-owrb-well-driller-fact-sheet ($0), fl-nwfwmd-well-fees through fl-manatee-water-wells-2026 ($35-$265), ny-dutchess-dbch-fees ($45), wi-dnr-well-notification ($50.50), ga-pierce-well-permit-2024 ($70), idaho-code-42-235 ($75), crs-37-92-602 ($100), az-ars-45-596 ($100-$150), nmac-19-27-5 ($125), wa-rcw-18-104-055 ($200), nc-wayne-private-wells through nc-gaston-eh-fees ($225-$450), mi-grand-traverse-fees-2026 and mi-delta-menominee-fees-2025 ($240-$334), mt-dnrc-form-613-2025 ($250-$400), pa-chester-county-health-fees ($300), mn-stat-103i-208 ($325), oh-logan-fees-2024 through oh-summit-fees-2025 ($350-$594), or-hb2808-2025 ($490), blanco-pedernales-gcd-fees-2025 ($500), ca-calaveras-fees-2026 ($693), ny-nyc-well-water-permit ($1,090 outlier).
  7. How Much Does a Well Pressure Tank Cost? , Mid Atlantic Water LLC (water-system supplier, nationwide). Accessed November 8, 2026. Updated 2026-10-14; prices live as of 2026-09. Tank replaced by plumber $800-$1,800 all-in (20-44 gal); labor $200-$500; submersible pump job $1,000-$2,500; tank plus pump $2,500-$5,000+. Supplier, not an installer.
  8. What Are the Cost Factors of Drilling a Santa Fe Water Well? , Boylan Water Well Service (Santa Fe, NM). Accessed November 8, 2026. Published 2026-06-25. Drilling incl. PVC casing $28-$65/ft; submersible pump $850-$2,500; casing and grouting $1,500-$4,000; pressure tank and controls $500-$1,800; electrical hookup and trenching $1,000-$3,500; permits and lab testing $300-$1,000; turn-key $12,000-$30,000+.
  9. DSHS Austin Laboratory Fee Schedule, effective 2026-09-01 , Texas Department of State Health Services. Accessed November 8, 2026. Potable Water (coliform) MZZ0441A $18.39; Nitrate-N EZZ0048A $30.00; Routine Water Mineral Group $155; All Metals $165; VOCs $150.
  10. Utah Administrative Code R655-4, Water Wells , Utah Division of Water Rights. Accessed November 9, 2026.
  11. Utah Code 73-3-25, Water well drillers , Utah State Legislature. Accessed November 9, 2026. Content taken from search excerpts and R655-4 references.
  12. Required Well Water Testing by County , Utah State University Extension. Accessed November 9, 2026.
  13. Well Registry (Wells 55) , Arizona Department of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  14. Understanding the Cost of Installing a Well in Mohave County , A-1 Arthur's Well Service (Kingman, AZ). Accessed November 8, 2026. Undated. Drilling $30-$65/ft; submersible pump $1,500-$3,000+; pressure tank $500-$1,200+; electrical and controls $500-$2,000; plumbing and trenching $1,000-$5,000+; total $10,000-$30,000+.
  15. A.R.S. 45-596 Notice of intention to drill , Arizona State Legislature. Accessed November 8, 2026. Filing fee $150; $100 for a well outside an AMA or INA used solely for domestic purposes with a pump of 35 gpm or less. Confirmed by A.A.C. R12-15-104 (effective 2023-10-13, https://www.law.cornell.edu/regulations/arizona/Ariz-Admin-Code-SS-R12-15-104) and ADWR form DWR 55-40.
  16. DWR Well Application Permit , Colorado Division of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  17. C.R.S. 37-92-602 Exemptions; presumptions; legislative declaration (current through Fall 2025) , Colorado Revised Statutes via colorado.public.law. Accessed November 8, 2026. Fee of $100 for a new exempt household well permit application; $60 for a replacement/paragraph (c) application.
  18. Water Testing , El Paso County Public Health Laboratory (CO). Accessed November 8, 2026. 2026. Total coliform/E. coli P/A $23.00; nitrate-N $30.00; real estate package $80.00.
  19. Wells , Idaho Department of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  20. Idaho Code 42-235 Drilling Permits , Idaho Legislature. Accessed November 8, 2026. $75.00 permit charge for a domestic or monitoring well; $200 otherwise. Confirmed by IDWR Form 235-1 (https://idwr.idaho.gov/wp-content/uploads/sites/2/forms/235-1-application-for-drilling-permit.pdf).
  21. Drinking Water Quality Fees (July 2026) , Central District Health (Boise, ID). Accessed November 8, 2026. Coliform test $20; nitrate test $21; sample collection by CDH $145.
  22. Well Driller Reports , Nevada Division of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  23. Points of Diversion (wells) , New Mexico Office of the State Engineer. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  24. 19.27.5 NMAC Water Rights Filing Fees, section 19.27.5.8 , New Mexico Office of the State Engineer (via NM State Records Center and Archives). Accessed November 8, 2026. Effective 2006-08-15. $125 for an application for a 72-12-1.1 domestic well permit; $75 to repair or deepen.
  25. Well and spring permits , Wyoming State Geological Survey (from Wyoming State Engineer's Office permits). Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.

How these figures are built: methodology. Updated November 2026.