costtodrillawell.com

Cost to drill a well in Mississippi: $6,800–$42,500

A drilled, finished water well in Mississippi typically costs $6,800–$42,500, with a midpoint of $22,300. Depth sets most of that price. Mississippi does not publish its well completion reports as a bulk download, so this estimate uses the national depth model of 100 ft to 300 ft, priced at national driller rates.1,2,3,4,5,6,7,8,9

Mississippi has no bulk well-record download we could use, so this page shows statewide estimates from the national depth model and no county figures.

Key figures for Mississippi

ItemFigure
Finished well, typical range (midpoint $22,300) $6,800–$42,5001,2,3,4,5,6,7,8,9
Drilling and casing only (no pump, tank, or hookup) $4,200–$31,4001,2,3,4,5,6
Drilling rate (national rates) $25–$75/ft3

Estimate a well in Mississippi

Typical total: $6,800–$42,500, midpoint $22,300.1,2,3,4,5,6,7,8,9

No usable well records for this area, so depths use the national model (100 ft to 300 ft).

Low uses the 25th percentile depth at low rates; high uses the 75th percentile at high rates.
Line itemLowMidHigh
Drilling (per foot of depth) (200 ft × $50/ft)$2,500$10,000$22,5003
Casing, installed (130 ft × $28/ft)$1,000$3,600$5,9004
Rig mobilization and setup ($550–$2,500)$600$1,500$2,5005
Well permit ($50–$500)$100$300$5006
Pump, wire, and drop pipe, installed ($1,000–$4,000)$1,000$2,500$4,0007
Pressure tank and switch, installed ($500–$1,800)$500$1,200$1,8007
Trench, water line, and electrical to the house ($1,000–$5,000)$1,000$3,000$5,0008
Water quality test ($50–$250)$100$200$3009
Total$6,800$22,300$42,500

Casing depth of 130 ft is a model assumption; the records for this area do not report casing.2

No state rate survey yet, so national driller rates are used.

Get quotes from licensed drillers in Mississippi

Tell us your ZIP code and what you need. We pass it to drillers who work in your part of Mississippi.

Submitting sends your request to Cost to Drill a Well. We reply by email and may pass it to well contractors who serve your ZIP code. See the privacy policy.

Where the money goes on a Mississippi well

Drilling is billed by the foot at $25–$75/ft, so the hole alone runs $2,500–$22,500 at the depths above. Casing, the steel or PVC pipe that lines the upper borehole, adds $1,000–$5,900 at $10–$45/ft. Rig setup is a flat $600–$2,500.

The pump, pressure tank, and trench to the house add $2,500–$10,800 on top of the hole. A quote that looks low next to the range above often leaves those three out, so ask for it itemized.

Sources3,4,5,6,7,8,9

Permits and driller licensing in Mississippi

Water wells in Mississippi fall under Mississippi Department of Environmental Quality, Office of Land and Water Resources. Mississippi requires a water well contractor's license from MDEQ, but an owner may build a well on their own property without one when the well supplies only the owner's or lessee's single-family permanent residence and meets the other conditions in the rule. The state well report must be prepared by the license holder responsible for the work and filed with MDEQ within 30 days of drilling completion.

Sources10,11,12

Groundwater and well construction in Mississippi

Well cap Submersible pump Casing to about 130 ft Total depth about 200 ft Soil and loose rock Open hole in rock
Cross-section of a 200 ft well with casing to 130 ft, the Mississippi median

Southern Mississippi sits over the Coastal Lowlands aquifer system, which is separated from the Mississippi embayment aquifer system by the thick clay Vicksburg-Jackson confining unit. Both systems are layered Coastal Plain sediments that thicken toward the axis of the Mississippi Embayment.

A well at the Mississippi median reaches 200 ft with casing to about 130 ft, a model assumption because the records here do not report casing. Mississippi State University Extension reports the Mississippi State Department of Health rule that a septic tank must be at least 50 feet from a private well and a drain field at least 100 feet.

Mississippi State University Extension says private well owners are not required to test their water, but recommends testing regularly and at least once a year.

Sources13,2,14,15

Mississippi compared with neighboring states

StateMedian depthTypical finished well
Mississippino records$6,800–$42,500
Alabamano records$6,800–$42,500
Arkansasno records$6,800–$42,500
Louisianano records$6,800–$42,500
Tennessee220 ft$7,900–$44,800

Sources1,2,3,4,5,6,7,8,9,16

Common questions

How much does it cost per foot to drill a well in Mississippi?

Drilling alone runs $25–$75/ft on the rates we compiled. Spread across a whole finished well, including casing, pump, tank, and hookup, the midpoint estimate works out to about $112/ft at a depth of 200 ft. Per-foot quotes rarely include the pump.

How much do a well pump and pressure tank add in Mississippi?

An installed submersible pump with wire and drop pipe runs $1,000–$4,000, and a pressure tank with its switch runs $500–$1,800. Together they are often the line items missing from a drilling quote, so a quote for the hole alone will look $3,700 cheaper than a finished well.

Related pages

For every state side by side and the national range, see the national well cost figures.

Sources

  1. National depth distribution, median of state percentiles , Cost to Drill a Well. Accessed November 9, 2026. Median across states with records of each state's 25th, 50th, and 75th percentile depth.
  2. Default casing share of well depth , Cost to Drill a Well. Accessed November 9, 2026. Median of state casing_p50 / depth_p50 across states that report casing. Used only where no local casing median exists.
  3. Water Well Installation: Complete Guide, Cost and Tips for Success , Stevens Drilling (La Vernia, TX). Accessed November 8, 2026. Published 2025-10-27. Drilling $25-$65/ft; pumps $500-$2,000; pressure tank $300-$1,500; permit/licensing $100-$750; total $7,500-$17,000+.
  4. Cost to Drill a Water Well in Northern California , Weeks Drilling & Pump Co. (Sebastopol, CA). Accessed November 8, 2026. Published 2026-04-30. Drilling $35-$130/ft; steel casing $20-$45/ft; pump and pressure tank $3,500-$9,000; permitting $500-$2,500.
  5. D-203(5) Statewide Drilling Services, Exhibit D Price Schedule (Thein Well Co., contract 226711) , Minnesota Office of State Procurement. Accessed November 8, 2026. 2023 state-contract unit rates from a licensed MN driller: 6-in borehole $30-$31/ft (mud rotary/auger), $75/ft air rotary in rock; 6-in casing $28/ft (code) to $48/ft (black steel); mobilization $1,000/project; 34-gal pressure tank installed $1,000, 62-gal $1,450; submersible pump 3/4-1 hp $1,250-$1,350 each; drop pipe $7/ft; pitless and lateral $2,000; trench $20/LF. Agency-buyer rates, not retail quotes.
  6. Compilation of fetched state and county well permit fees (research/rates/NOTES.md, section permit) , costtodrillawell.com research. Accessed November 8, 2026. Internal compilation used only for the national permit fallback. Component sources: ok-owrb-well-driller-fact-sheet ($0), fl-nwfwmd-well-fees through fl-manatee-water-wells-2026 ($35-$265), ny-dutchess-dbch-fees ($45), wi-dnr-well-notification ($50.50), ga-pierce-well-permit-2024 ($70), idaho-code-42-235 ($75), crs-37-92-602 ($100), az-ars-45-596 ($100-$150), nmac-19-27-5 ($125), wa-rcw-18-104-055 ($200), nc-wayne-private-wells through nc-gaston-eh-fees ($225-$450), mi-grand-traverse-fees-2026 and mi-delta-menominee-fees-2025 ($240-$334), mt-dnrc-form-613-2025 ($250-$400), pa-chester-county-health-fees ($300), mn-stat-103i-208 ($325), oh-logan-fees-2024 through oh-summit-fees-2025 ($350-$594), or-hb2808-2025 ($490), blanco-pedernales-gcd-fees-2025 ($500), ca-calaveras-fees-2026 ($693), ny-nyc-well-water-permit ($1,090 outlier).
  7. How Much Does a Well Pressure Tank Cost? , Mid Atlantic Water LLC (water-system supplier, nationwide). Accessed November 8, 2026. Updated 2026-10-14; prices live as of 2026-09. Tank replaced by plumber $800-$1,800 all-in (20-44 gal); labor $200-$500; submersible pump job $1,000-$2,500; tank plus pump $2,500-$5,000+. Supplier, not an installer.
  8. What Are the Cost Factors of Drilling a Santa Fe Water Well? , Boylan Water Well Service (Santa Fe, NM). Accessed November 8, 2026. Published 2026-06-25. Drilling incl. PVC casing $28-$65/ft; submersible pump $850-$2,500; casing and grouting $1,500-$4,000; pressure tank and controls $500-$1,800; electrical hookup and trenching $1,000-$3,500; permits and lab testing $300-$1,000; turn-key $12,000-$30,000+.
  9. DSHS Austin Laboratory Fee Schedule, effective 2026-09-01 , Texas Department of State Health Services. Accessed November 8, 2026. Potable Water (coliform) MZZ0441A $18.39; Nitrate-N EZZ0048A $30.00; Routine Water Mineral Group $155; All Metals $165; VOCs $150.
  10. Water Well Drillers , Mississippi Department of Environmental Quality. Accessed November 9, 2026.
  11. 11 Miss. Code R. 7-2.2, Applicability , Mississippi Environmental Quality Permit Board (via Cornell LII). Accessed November 9, 2026. Full list of exemption conditions was not visible in the excerpt.
  12. State Well Report form , Mississippi Department of Environmental Quality. Accessed November 9, 2026.
  13. HA 730-F, Ground Water Atlas of the United States (Arkansas, Louisiana, Mississippi) , U.S. Geological Survey. Accessed November 9, 2026.
  14. Private Water Well Setback Distances , Mississippi State University Extension. Accessed November 9, 2026.
  15. Private well water testing guidance (P3813) , Mississippi State University Extension. Accessed November 9, 2026.
  16. Water Well Program, well locations , Tennessee Department of Environment and Conservation. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.

How these figures are built: methodology. Updated November 2026.