costtodrillawell.com

Cost to drill a 600 ft well: $22,200–$76,700

A 600 ft drilled water well costs $22,200–$76,700 finished, with a midpoint of $49,400, at national driller rates. Drilling and casing alone run $19,600–$65,600; the pump, pressure tank, and hookup make up the rest. It is a typical depth in Arizona, where the middle half of reported wells spans 600 ft.1,2,3,4,5,6,7,8,9

Key figures for a 600 ft well

ItemFigure
Finished 600 ft well (midpoint $49,400) $22,200–$76,7001,2,3,4,5,6,7,8,9
Drilling and casing only $19,600–$65,6001,2,3,4,5,6
All-in cost per foot, midpoint $82/ft1,2,3,4,5,6,7,8,9
States with a median deeper than 600 ft 0 of 351

Estimate a 600 ft well

Typical total: $22,200–$76,700, midpoint $49,400.1,2,3,4,5,6,7,8,9

Depth set to 600 ft by you. Rates for the United States.

Low uses the 25th percentile depth at low rates; high uses the 75th percentile at high rates.
Line itemLowMidHigh
Drilling (per foot of depth) (600 ft × $50/ft)$15,000$30,000$45,0003
Casing, installed (390 ft × $28/ft)$3,900$10,700$17,6004
Rig mobilization and setup ($550–$2,500)$600$1,500$2,5005
Well permit ($50–$500)$100$300$5006
Pump, wire, and drop pipe, installed ($1,000–$4,000)$1,000$2,500$4,0007
Pressure tank and switch, installed ($500–$1,800)$500$1,200$1,8007
Trench, water line, and electrical to the house ($1,000–$5,000)$1,000$3,000$5,0008
Water quality test ($50–$250)$100$200$3009
Total$22,200$49,400$76,700

Casing depth of 390 ft is a model assumption; the records for this area do not report casing.2

Get quotes from licensed drillers

Tell us your ZIP code and how deep wells run near you. We pass it to drillers who work in your area.

Submitting sends your request to Cost to Drill a Well. We reply by email and may pass it to well contractors who serve your ZIP code. See the privacy policy.

Line items on a 600 ft well

Well cap Submersible pump Casing to about 390 ft Total depth about 600 ft Soil and loose rock Open hole in rock
Cross-section of a 600 ft well with casing to about 390 ft

The borehole costs $15,000–$45,000 at 600 ft. Casing, the pipe that lines the upper borehole, is assumed to run to about 390 ft here; your driller sets the real casing depth from the geology they hit.

Line itemLowMidHigh
Drilling (per foot of depth)$15,000$30,000$45,000
Casing, installed$3,900$10,700$17,600
Rig mobilization and setup$600$1,500$2,500
Well permit$100$300$500
Pump, wire, and drop pipe, installed$1,000$2,500$4,000
Pressure tank and switch, installed$500$1,200$1,800
Trench, water line, and electrical to the house$1,000$3,000$5,000
Water quality test$100$200$300
Total$22,200$49,400$76,700

Sources3,4,5,6,7,8,9,2

States where 600 ft is a typical depth

In these 1 states, 600 ft falls inside the middle half of reported domestic wells. The cost column uses each state's driller rates where we have them.

StateMedian depth (ft)Middle half (ft)600 ft well
Arizona410280–600$26,200–$70,800

Sources10,2,11,4,5,12,9

Counties with a median well near 600 ft

14 counties with 30 or more reports have a median that rounds to this page's depth.

CountyStateMedian depth (ft)Reports
MaderaCalifornia6001,374
JeffersonColorado7001,123
LarimerColorado600894
PinalArizona600379
San DiegoCalifornia630344
BoulderColorado570324
McDonaldMissouri660258
St. CharlesMissouri640251
Clear CreekColorado560200
WebbTexas640105
HartleyTexas55092
AudrainMissouri67058
MonroeMissouri61033
KlebergTexas65033

Sources13,14,10,15,16

Common questions

Is 600 ft deep for a water well?

600 ft is deeper than the median domestic well in 35 of the 35 states that publish completion reports in bulk. The national median is 200 ft. Whether 600 ft is normal where you live depends on the aquifer, so compare it with the county table on your state page.

How much more does a deeper well cost than a 600 ft well?

Going to 800 ft raises the midpoint from $49,400 to $63,000. Stopping at 500 ft brings it down to $42,600. The driller cannot promise a depth in advance, so a quote should state the per-foot rate for any footage beyond the estimate.

Related pages

For the full range at every depth and state, see cost to drill a well.

Sources

  1. National depth distribution, median of state percentiles , Cost to Drill a Well. Accessed November 9, 2026. Median across states with records of each state's 25th, 50th, and 75th percentile depth.
  2. Default casing share of well depth , Cost to Drill a Well. Accessed November 9, 2026. Median of state casing_p50 / depth_p50 across states that report casing. Used only where no local casing median exists.
  3. Water Well Installation: Complete Guide, Cost and Tips for Success , Stevens Drilling (La Vernia, TX). Accessed November 8, 2026. Published 2025-10-27. Drilling $25-$65/ft; pumps $500-$2,000; pressure tank $300-$1,500; permit/licensing $100-$750; total $7,500-$17,000+.
  4. Cost to Drill a Water Well in Northern California , Weeks Drilling & Pump Co. (Sebastopol, CA). Accessed November 8, 2026. Published 2026-04-30. Drilling $35-$130/ft; steel casing $20-$45/ft; pump and pressure tank $3,500-$9,000; permitting $500-$2,500.
  5. D-203(5) Statewide Drilling Services, Exhibit D Price Schedule (Thein Well Co., contract 226711) , Minnesota Office of State Procurement. Accessed November 8, 2026. 2023 state-contract unit rates from a licensed MN driller: 6-in borehole $30-$31/ft (mud rotary/auger), $75/ft air rotary in rock; 6-in casing $28/ft (code) to $48/ft (black steel); mobilization $1,000/project; 34-gal pressure tank installed $1,000, 62-gal $1,450; submersible pump 3/4-1 hp $1,250-$1,350 each; drop pipe $7/ft; pitless and lateral $2,000; trench $20/LF. Agency-buyer rates, not retail quotes.
  6. Compilation of fetched state and county well permit fees (research/rates/NOTES.md, section permit) , costtodrillawell.com research. Accessed November 8, 2026. Internal compilation used only for the national permit fallback. Component sources: ok-owrb-well-driller-fact-sheet ($0), fl-nwfwmd-well-fees through fl-manatee-water-wells-2026 ($35-$265), ny-dutchess-dbch-fees ($45), wi-dnr-well-notification ($50.50), ga-pierce-well-permit-2024 ($70), idaho-code-42-235 ($75), crs-37-92-602 ($100), az-ars-45-596 ($100-$150), nmac-19-27-5 ($125), wa-rcw-18-104-055 ($200), nc-wayne-private-wells through nc-gaston-eh-fees ($225-$450), mi-grand-traverse-fees-2026 and mi-delta-menominee-fees-2025 ($240-$334), mt-dnrc-form-613-2025 ($250-$400), pa-chester-county-health-fees ($300), mn-stat-103i-208 ($325), oh-logan-fees-2024 through oh-summit-fees-2025 ($350-$594), or-hb2808-2025 ($490), blanco-pedernales-gcd-fees-2025 ($500), ca-calaveras-fees-2026 ($693), ny-nyc-well-water-permit ($1,090 outlier).
  7. How Much Does a Well Pressure Tank Cost? , Mid Atlantic Water LLC (water-system supplier, nationwide). Accessed November 8, 2026. Updated 2026-10-14; prices live as of 2026-09. Tank replaced by plumber $800-$1,800 all-in (20-44 gal); labor $200-$500; submersible pump job $1,000-$2,500; tank plus pump $2,500-$5,000+. Supplier, not an installer.
  8. What Are the Cost Factors of Drilling a Santa Fe Water Well? , Boylan Water Well Service (Santa Fe, NM). Accessed November 8, 2026. Published 2026-06-25. Drilling incl. PVC casing $28-$65/ft; submersible pump $850-$2,500; casing and grouting $1,500-$4,000; pressure tank and controls $500-$1,800; electrical hookup and trenching $1,000-$3,500; permits and lab testing $300-$1,000; turn-key $12,000-$30,000+.
  9. DSHS Austin Laboratory Fee Schedule, effective 2026-09-01 , Texas Department of State Health Services. Accessed November 8, 2026. Potable Water (coliform) MZZ0441A $18.39; Nitrate-N EZZ0048A $30.00; Routine Water Mineral Group $155; All Metals $165; VOCs $150.
  10. Well Registry (Wells 55) , Arizona Department of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  11. Understanding the Cost of Installing a Well in Mohave County , A-1 Arthur's Well Service (Kingman, AZ). Accessed November 8, 2026. Undated. Drilling $30-$65/ft; submersible pump $1,500-$3,000+; pressure tank $500-$1,200+; electrical and controls $500-$2,000; plumbing and trenching $1,000-$5,000+; total $10,000-$30,000+.
  12. A.R.S. 45-596 Notice of intention to drill , Arizona State Legislature. Accessed November 8, 2026. Filing fee $150; $100 for a well outside an AMA or INA used solely for domestic purposes with a pump of 35 gpm or less. Confirmed by A.A.C. R12-15-104 (effective 2023-10-13, https://www.law.cornell.edu/regulations/arizona/Ariz-Admin-Code-SS-R12-15-104) and ADWR form DWR 55-40.
  13. Well Completion Reports (Online System for Well Completion Reports, OSWCR) , California Department of Water Resources. Accessed November 8, 2026. Statewide well completion report dataset used for depth records.
  14. DWR Well Application Permit , Colorado Division of Water Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  15. Water well records (WIMS) , Missouri Department of Natural Resources. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.
  16. Submitted Driller's Reports Database , Texas Water Development Board. Accessed November 8, 2026. Well completion records used for depth, casing, and yield distributions.

How these figures are built: methodology. Updated November 2026.